GYXTW Fiber Optic Cable for Aerial and Duct Applications

GYXTW outdoor fiber cable is a self-supporting insulated cable that contains all optical fibres required for a telecommunication line. This type of cable is designed for outside plant (OSP) installation and can be suspended between utility poles or transmission tower.

It is used for duct, aerial and direct buried applications. It is characterized by two phosphate steel wire central strength members, jelly filled loose tube with water-blocking material and longitudinally wrapped by filling compound.

Aerial

The GYXTW fiber optic cable is an outdoor cable designed for use in duct and aerial applications. It is suitable for both symmetric and asymmetric networks, and can be used in any environment where it will be exposed to harsh gyxtw-fiber-optic-cable-aerial-and-duct weather conditions. It is available in a variety of different core counts and can handle high-density data transmission.

Aerial fibre deployment is an alternative to buried installation and uses air-blown, jetted or pulled fibers into a protective duct. This method is often preferred by small network providers, as it offers a cost-effective solution for their infrastructure. However, it is important to note that aerial cables can be affected by adverse climatic hazards and need to be carefully managed.

Typical applications include telecommunications, CCTV surveillance systems, and power distribution. The cable is also used in a number of security applications, where it can provide secure communication between sensors in harsh environments. The cable is designed with heavy jackets and aramid strength members to ensure that it can withstand a number of environmental challenges.

The GYXTW optical fiber ribbon cable is made of central loose tube, a thermoplastic material which contains optical fibers and water blocking yarm, and is wrapped by PSP longitudinally. It is then reinforced by two parallel steel wires and completed with PE sheath. It has good moisture-resistance and flexibility, and its tensile strength and crush resistance performance are also good.

Duct

GYXTW armoured fiber cable is ideal for aerial and duct applications. It offers a compact, flexible design and supports high-density data transmission. It has a small diameter and light weight, making it easy to install. It also has excellent mechanical and temperature properties. It is designed with low smoke and zero halogen, and its sheath is UV-resistant and flame retardant.

This telecommunications cable is available in single-mode and multimode versions, with a maximum of 24 cores. It features a central loose tube that is jelly-filled and is wrapped with a polyethylene (PE) sheath. The loose tube is filled with a water-resistant filling compound to keep the cable compact and prevent damage to the fibers. The cable is then covered with a layer of PSP and two parallel steel wires that enhance the tensile strength of the cable.

The central loose tube is a key feature of the cable, as it ensures that the fibers have good excess length and minimizes the influence of lateral crush. The loose tube is also filled with a waterproofing compound to ensure that the cable remains dry and resistant to moisture. It is also easy to maintain, as it can be blown, jetted or pulled into the duct without damaging the fibers. This allows for faster and mpo-patch-panels more cost-effective installations. The central loose tube is also resistant to abrasion and corrosion, which helps to protect the fibers.

Direct Burial

GYXTW fiber optic cables are used in telecommunications to transmit high-speed data over long distances, in security and surveillance systems to transfer high-resolution video footage, and in industrial automation applications to connect sensors in harsh environments. They are often installed above ground on poles or towers to avoid costly underground digging, and can withstand a wide range of environmental stresses such as moisture and temperature fluctuations.

The light-armored design of this cable provides increased mechanical protection against crushing, impact, and rodent damage, making it ideal for challenging outdoor conditions. It has a central loose tube with single-mode or multimode optical fiber, which is sheathed in a sheath made of polyethylene (PE). This combination provides resistance against abrasion and other environmental factors, which can cause damage to the optical fibers.

In addition to its protective PE sheath, this cable has a metallic armored core that provides additional mechanical protection against damage. It also has two layers of steel tape that protect the optical fibers from external forces, and a longitudinal layer of PSP to enhance waterproofing. The loose tube is centrally located with good excess length, which minimizes the influence of lateral crush. In addition, the double wire as strength member is designed to provide excellent strain performance. The entire cable is sheathed in a water blocking jelly, and the outer PE sheath is reinforced with two steel wires to ensure that it can be installed safely and effectively.

Installation

GYXTW fiber optic cable has significantly impacted the telecommunication industry, offering superior features that aren’t found in other types. It’s widely available in the market, easily accessible for purchase, and installation does not require technical experience, making it user-friendly. It’s also affordable and performs well in humid or underwater environments, ensuring it can be used for a long time without spoiling or aging.

These central loose tube optical fiber ribbon cables are suitable for installation in aerial or duct environment for communication between bureaus, metropolitan networks, access network and is especially suitable for situations where high-density fibers are expected. It can be laid by air-blown, jetted or pulled into a duct for laying. The sheath is made of low-stretch and high-density polyethylene with a filling compound for moisture resistance, crush resistance and two parallel steel wires as strength members which enhance tensile strength.

GYXTW armoured fiber optic cable has a central strength member and can accommodate up to 24 fiber strands. It is a good choice for outdoor overhead applications, as it has a strong support structure that can endure heavy loads. It is also easy to install, as it can be easily suspended on poles or other structures above ground. It is highly durable and withstands harsh weather conditions, including snow and rain. It also has a waterproof design that protects the strands from moisture and humidity.