What Is a Distillate Cartridge Filler?

A distillate cartridge filler is a piece of specialized equipment that can boost production rates while maintaining high-quality standards. This type of machine automates the cartridge filling process, cutting labor costs and improving efficiency.

It also ensures that each cartridge receives the same amount of distillate, which is crucial for maintaining quality and consistency. Learn more about this technology, including how it works, and how you can use it to your advantage.

1. Warming the Distillate

When working with distillate, it is important to properly warm up the syringe in order to achieve the desired consistency. The best way to do this is by using a syringe warmer, which can be purchased online or at many dispensaries. The warmth will help to reduce the viscosity of the oil, making it easier to dispense.

Before attempting to use the syringe, make sure that it is clean and free of any contaminants. Also, be sure to wear gloves when handling the syringe, as the oil can irritate skin. Finally, it is important to use a stable work surface and to ensure that the syringe is properly calibrated for the amount of distillate that will be needed.

Once the syringe has been heated, it can be used to dispense the proper amount of product for the cartridge. This distillate cartridge filler will help to ensure that the dosage is accurate and that the resulting experience is optimal.

Distillate can be used in a variety of ways, including by applying it to edibles or vaporizing it through a dab rig. It can also be administered sublingually, which allows the active compounds to be absorbed through the mucous membranes and leads to more immediate effects. Additionally, it can be mixed with a carrier oil to create tinctures that can be consumed orally.

2. Using a Syringe

Whether you’re using a dab rig to consume oil distillates or refilling your empty cartridges for convenient transport, you’re going to need the right equipment to get the job done. While there are specialized cartridge filler machines that act as both a heating apparatus and injection syringe for maximum efficiency, you can still get the job done by hand with relatively few tools.

For starters, you’ll need a syringe that can be used to precisely measure your oil. Typically, industrial-grade packaged 3-10ml syringes are most popular for manual filling purposes. It’s also helpful to have a scale on hand for accuracy. For example, Buckeye Relief uses a scale to ensure that each cart is filled to its max capacity, which requires precise measurement in order to maintain compliance with state regulations.

Once your syringe is loaded with your desired amount of oil, it’s time to add the terpenes. For most distillates, the recommended terpene ratio is about 10% of your total oil volume. After adding your terpenes, you’ll want to stir the mixture until it has an even consistency.

Once your cartridge is full, you’ll want to reseal it to keep it safe for later use. This is a relatively simple process that can be completed with a low-temperature glue gun and all-purpose glue sticks. The JetPens team recommends using enough glue to create a small lip over the opening of the cartridge. This makes it easier to peel off the glue seal when you’re ready to use your new cartridge.

3. Filling the Cart

Cartridges are extremely versatile, and can be used as standalone products or as an add-on for other products like edibles, joints, dabs, and bongs. Many consumers are opting to learn how to fill their own cartridges, in order to be able to have complete control over the ingredients that they put into their product.

When making your own cartridges, it is important to prioritize safety. Always work in a well-ventilated Distillate Cartridge Filler area, and handle concentrated substances with care. It is also crucial to use high-quality oil or distillate for the best results. Using low-quality oil can damage the cartridge, leading to leaks or other issues.

Start by drawing your desired amount of oil into the syringe. Be sure to avoid filling the center post of the cartridge, as this can damage the coil. It is also recommended to warm up the syringe first, as this can help prevent the oil from hardening too quickly.

Once you’ve filled the syringe, slowly inject it into the cartridge until it is full. It is important not to overfill the cartridge, as this can cause a mess and reduce the efficiency of the coil. Once the cartridge is full, let it stand for a few minutes before reassembling it. Once reassembled, the cartridge is ready for use.

4. Screwing on the Tip

A THC cartridge is a small, pre-filled container used in vaporizing devices designed for the consumption of tetrahydrocannabinol (THC). This method of consuming cannabis is popular among recreational and medical marijuana users alike. Cartridges screw into a battery and deliver instant-inhale vapor that can provide an intense high or relief for a wide variety of conditions.

Before attempting to refill your cartridge, make sure that it is clean inside and out. It is also important to ensure that the coil and wick are properly soaked with oil, as if they aren’t the cartridge will leak. This can be accomplished by storing the cartridge upright and in a cool, dry area. Additionally, older cartridges with cotton wicks may need longer soaking times than newer, ceramic style wicks.

First, remove the mouthpiece from the cartridge. Next, attach a blunt-tipped syringe to the end of your needle. Slowly squeeze the syringe, being mindful to only fill up to the maximum fill line or what is shown in the photo. Be careful not to fill the center post, as this can damage the coil and render the cartridge unusable.

Once the cartridge is filled, carefully screw on the tip and apply a little pressure to ensure that it is secure. It’s a good idea to work over a silicone mat, as this makes cleanup easier and less messy. Finally, be sure to store your cartridge upright in a cool, dark place, as this will help preserve the quality and flavor of your oil.